Two-car square
A 20×20 ft garage with our 20×20 ft stock kit. Full coverage for a square two-car bay.
Plan your hexagon garage lighting layout
Find the right hexagon layout for your garage, workshop, or showroom. Enter your room size to see every stock kit that fits, drawn to scale with clearances—or start from an example below. Whether you are ready to buy a preset, still deciding what you need, or looking at a custom grid, you can do it from this page. Have a large space and not sure what size you need? Fill the whole room with hexes and trim from there.
How it works
- Enter your roomType width and length in feet, or pick a common garage size.
- Preview fixtures that fitEvery stock kit that fits your space is drawn centered, with leftover clearance on each side.
- Or fill the spaceNot sure what size you need? Switch to Fill the space to cover your whole room with 2 ft or 4 ft bar hexagons, then trim it down.
- Choose what to do nextShop a stock kit that fits as is, or submit an edited or filled layout for review through our $125 custom design service.
Example layouts
A few stock fixtures in common rooms, so you can see the idea before you type anything. Select one to load it into the planner.
Long bay
A 20×30 ft garage with our 19×25 ft stock kit. A longer workshop or multi-car bay, with clearance around the fixture.
One-car
A 12×20 ft garage with our 8×15.7 ft stock kit. A tighter single-car space with a narrow grid down the length of the room.
See what fits your room
Enter your garage width and length in feet. Kits that fit appear below, largest first, or switch to Fill the space to cover the whole room with hexes.
Your room
Common room sizes
Planner mode
Fill covers your whole room with hexes, leaving the wall clearance you set. Pick a hex size, then click hexes to trim the layout, or leave it full and submit it for review. Trimming is part of our $125 custom design service.
Hex size
A 2 ft bar hex measures about 48 in point to point and 41 in flat to flat. A 4 ft bar hex is nearly 8 by 7 ft; its drawing is approximate.
Space preview
Rotate the kit
Flip hex stacking
The kit outline is centered in the room, and the hex pattern is centered inside that outline. Rotate turns the kit 90 degrees. The fill outline sits inside the room at the wall clearance you set, and the hexes are centered inside it. Click a hex to remove it, or click empty space in the room to add one. Deleted hexes stay outlined, and each separate deleted section is measured. After edits, Recenter and remeasure updates the outline and clearance numbers. Flip changes whether the hexes stack vertically or horizontally.
We'll confirm fit and pricing. Changes, trimming and wiring plans are part of our $125 custom design service.
Drawings are an approximate preview of each layout, not a production drawing. The 4 ft bar hex size is approximate. Dimmable, Color Selectable, and Low Voltage kits share many of these same footprints.
Stock kits that fit
Start a custom design request
Questions
What size hexagon light kit do I need for my garage?
Enter your garage width and length in the planner. It lists every stock kit that physically fits and draws each one in the room with clearance on each side. If you are between sizes, start with the largest kit that fits and treat the leftover space as walkway or door clearance.
I have a large space and don't know what size I need.
Switch to Fill the space. The planner covers your whole room with 2 ft or 4 ft bar hexagons, leaving the wall clearance you set. Trim it yourself by clicking hexes, or submit it as is for review. Sizing it down, trimming and wiring plans are part of our $125 custom design service.
Can I rotate or flip the layout?
Yes. Rotate turns the fixture 90 degrees, rotating the native hex pattern a full quarter turn—even on square kits. On a rectangular kit, Rotate also switches the outline from wide to tall. Flip changes whether the hexes stack vertically or horizontally. After you add or remove hexes, use Recenter and remeasure so the outline and clearances match what you see.
What if no stock kit fits, or I want a custom shape?
Adjust the hexes in the preview, then choose Submit my layout for review and add your name, email, phone, color temperature, and the features you want. We'll confirm fit and pricing. Changes, trimming and wiring plans are part of our $125 custom design service. You can also contact us from the links at the bottom of this page.
Which product line should I choose?
Standard runs on 100–240V (a 277V configuration is also available), is certified ETL UL/CSA or CE/RoHS, and does not dim. Dimmable offers 3-step dimming without a remote and is CE/RoHS; it also runs on 100–240V or 277V. Color Selectable lets you choose the color temperature, does not dim, and is CE/RoHS (not ETL), on 100–240V. Low Voltage is 24V DC, dims 1–100% with a remote included, and uses a transformer rated 100–265V input (CE/RoHS) or 110–277V input (UL/cUL).
How do I get a custom layout?
If a stock kit fits as is, choose Shop this kit. If you edited the hexes or used Fill the space, choose Submit my layout for review and add your contact details, color temperature, and desired features. We'll confirm fit and pricing. Changes, trimming and wiring plans are part of our $125 custom design service. You can also download an image of your layout to keep or email to us.
Still need to fine-tune?
If the layout still needs a bit more tweaking, start a custom design or get in touch.