Hex garage Lighting in Gym

Hex Lighting Warranty Claims

Hex lighting warranty

Hexagon Garage Lights and Dimmable Hexagon Garage Lights have a 5-year (60-month) warranty, as stated in their product descriptions.

How to request warranty support

  1. Email support@hexagongarage.com with the subject “Hex Lighting Warranty Claim”.
  2. Include your product name, a description of the issue, and when you first noticed it.
  3. To help us identify your purchase, include your order number or a copy of your order confirmation or receipt, if available. Photos or a short video can also help explain the issue.
  4. Ask our support team to review your purchase and issue and confirm the next steps.

Proof of purchase and claim review

Your order number, order confirmation, or receipt can help us locate and review your purchase. If you cannot find these details, contact us with the name and email address used to place the order so we can help look it up. Our support team will confirm what proof is eligible and whether additional information is needed for your claim.

For questions about coverage, the warranty start date, or the resolution available for your issue, contact our support team. The product descriptions state the 60-month warranty duration but do not specify those details.

Troubleshooting — try this first

The whole grid is dark

Check the breaker and the wall switch. Confirm there is power at the feed, and that the Live, Neutral, and Ground connections are tight and not reversed. If you are not comfortable checking the wiring, use a licensed electrician.

One bar or one hex is dark

Turn the power off first. Use the red removal tool to take out the dark bar, check that the pins are straight, then push the bar straight back in until it clicks.

Lights get dimmer toward the far end

Too many bars are running off one power connection. Add another power drop and split the load so no single drop is overloaded.

Brightness is out of step (3-step dimming)

Toggle the wall switch off and on twice within one second. The bars should reset to full brightness.

Lights flicker at the low end of a 0–10V dimmer

Remove the dimmer faceplate and slowly turn the small calibration screw clockwise until the light stays steady at the lowest setting.

The wireless remote does nothing

Replace the remote's battery, then re-pair the remote to the wall dimmer switch (the receiver is in the dimmer) using the steps in its instructions.

If that doesn't fix it, use the form below to request service or parts.

Hexagon Garage™ service and parts request

Send us your original order number, a short description, and a photo of your fixture marked with where power connects and which bars are affected. Everything goes to our support team in one request.

The 60-month Hexagon Garage™ warranty (effective 9/12/25) covers all of our lighting systems.

Sample request Example only

This is what a completed request looks like. All details below are made up.

Request type
Service / warranty
Original order number
HXG000000 example
Describe the problem
Two bars in the middle row flicker and then go dark; the rest of the grid works.
Marked-up photo
Sample illustration of a hexagon light grid. A yellow circle marks where power connects on the left side, and a red circle surrounds two dark bars in the middle. Sample illustration, not a real customer photo. Yellow = where power connects. Red = the bars with the problem.
Request type

You can find it in your order confirmation email, for example #1234.

Photos of your fixture

  1. Take or upload a photo of the whole fixture.
  2. With the yellow pen, mark where power is connected.
  3. With the red pen, circle the affected bars or problem area.

Up to 4 photos. Draw with your finger or mouse.